Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Charles Morrill
 
Posts: n/a
Default Mike Graham

Does anyone know what happened to Mike Graham? I used to enjoy
his posts a good bit, but he seems to have suddenly stopped posting
about a year ago and his website no longer exists.

Thanks, Charles Morrill

  #2   Report Post  
ATP
 
Posts: n/a
Default


"Charles Morrill" wrote in message
news:2004122415474627590%deichles@yahoocom...
Does anyone know what happened to Mike Graham? I used to enjoy
his posts a good bit, but he seems to have suddenly stopped posting
about a year ago and his website no longer exists.

Thanks, Charles Morrill


One of his "relationships" spilled over into the newsgroup. A few
mercilessly broke his chops over it. After that he disappeared, which was
too bad.


  #3   Report Post  
Sunworshipper
 
Posts: n/a
Default

On Fri, 24 Dec 2004 17:07:39 -0500, "ATP"
wrote:


"Charles Morrill" wrote in message
news:2004122415474627590%deichles@yahoocom...
Does anyone know what happened to Mike Graham? I used to enjoy
his posts a good bit, but he seems to have suddenly stopped posting
about a year ago and his website no longer exists.

Thanks, Charles Morrill


One of his "relationships" spilled over into the newsgroup. A few
mercilessly broke his chops over it. After that he disappeared, which was
too bad.


Isn't that her down in the practical jokes with the ~~'s on each end?
  #4   Report Post  
 
Posts: n/a
Default

This the same Mike?:

http://web.295.ca/mike_graham/



Charles Morrill wrote:
Does anyone know what happened to Mike Graham? I used to enjoy
his posts a good bit, but he seems to have suddenly stopped posting
about a year ago and his website no longer exists.

Thanks, Charles Morrill


  #5   Report Post  
Old Nick
 
Posts: n/a
Default

On Fri, 24 Dec 2004 20:49:38 GMT, Charles Morrill
vaguely proposed a theory
.......and in reply I say!:

remove ns from my header address to reply via email

Well what happened was, metalwork was more than his relationship could
stand. How can you compete, as a mere lone female, with "flow",
"stickout", "penetration", "depth", "sweat", "root run" etc as
continual topics of conversation?

Does anyone know what happened to Mike Graham? I used to enjoy
his posts a good bit, but he seems to have suddenly stopped posting
about a year ago and his website no longer exists.

Thanks, Charles Morrill




  #6   Report Post  
Spehro Pefhany
 
Posts: n/a
Default

On 24 Dec 2004 16:37:55 -0800, the renowned wrote:

This the same Mike?:

http://web.295.ca/mike_graham/

Yup.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
  #7   Report Post  
Roy
 
Posts: n/a
Default

Looks like Mike traded in his blacksmithing tools and welder for a
camera and is now facinated by bugs!

Thats cool!


Visit my website: http://www.frugalmachinist.com
Opinions expressed are those of my wife,
I had no input whatsoever.
Remove "nospam" from email addy.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cheap To A Good Home Jimbo Metalworking 17 November 4th 03 12:19 PM


All times are GMT +1. The time now is 07:34 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"