Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Heat treating aluminum?
Hi,
New to this group and figured I would post a question. Wondering if there are any metallurgist's on this group, or someone who knows how to heat treat aluminum? What I've got is 2024 in a "O" rating and would like to heat treat it to at least a T3, if not higher. Thickness's I am working with are .032 / .063 /.080. I know there is a way to do this with an oven and heat. I have access to an oven that is programable and could melt aluminum. It is also programable to step down in stages, for desired times and temps. Anyone know how to do this? If you could, try not to get to technical, just looking for a basic way to do it if possible? If there isn't a basic way, that would be a good answer also. Thanks, Matt |
#2
|
|||
|
|||
"Matt" wrote in message oups.com... Hi, New to this group and figured I would post a question. Wondering if there are any metallurgist's on this group, or someone who knows how to heat treat aluminum? What I've got is 2024 in a "O" rating and would like to heat treat it to at least a T3, if not higher. Thickness's I am working with are .032 / .063 /.080. I know there is a way to do this with an oven and heat. I have access to an oven that is programable and could melt aluminum. It is also programable to step down in stages, for desired times and temps. Anyone know how to do this? If you could, try not to get to technical, just looking for a basic way to do it if possible? If there isn't a basic way, that would be a good answer also. Thanks, Matt http://www.suppliersonline.com/propertypages/2024.asp " This is an age-hardening alloy and responds to heat treatment to accomplish the strengthening (aging). See "Annealing" and " Aging". The T4 condition is attained by a 920 F heating followed by cold water quench and aging at room temperature. T6 by the same 920 F and quench followed by 375 F for 10 hours and air cooling " -- SVL |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Heat treating 4130 steel at home | Metalworking | |||
A quick question. | UK diy | |||
Heat Keeps Shutting Off | Home Repair |