 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
lathe
I just cross posted you to rec.crafts.metalworking.
 "H?ken Hveem" wrote: I have a problem, i byed a used Tornio Anselmi MonoFAP 180 AE lathe from a local machinists scool. The operating/maintenance manual is missing. Where i can get hold of a copy of the manual? H?ken Hveem Norway Good luck, Alvin in Arizona |
|
#2
|
|||
|
|||
|
No ansvers on my lathe problem yet.... Tried to e-mail several companys
down in italy that sells lathes from the Tornio Anselmi factory, but the fat ****** italians never ansvers my mail. Are they just to lazy or to dumb to understand english ? skrev i melding ... I just cross posted you to rec.crafts.metalworking. "H?ken Hveem" wrote: I have a problem, i byed a used Tornio Anselmi MonoFAP 180 AE lathe from a local machinists scool. The operating/maintenance manual is missing. Where i can get hold of a copy of the manual? H?ken Hveem Norway Good luck, Alvin in Arizona |
|
#3
|
|||
|
|||
|
"Håken Hveem" wrote:
No ansvers on my lathe problem yet.... Tried to e-mail several companys down in italy that sells lathes from the Tornio Anselmi factory, but the fat ****** italians never ansvers my mail. Are they just to lazy or to dumb to understand english ? skrev i melding ... I just cross posted you to rec.crafts.metalworking. "H?ken Hveem" wrote: I have a problem, i byed a used Tornio Anselmi MonoFAP 180 AE lathe from a local machinists scool. The operating/maintenance manual is missing. Where i can get hold of a copy of the manual? H?ken Hveem Norway Good luck, Alvin in Arizona I'm not surprised.. |
|
#4
|
|||
|
|||
|
"Håken Hveem" wrote in message No ansvers on my lathe problem yet.... Tried to e-mail several companys down in italy that sells lathes from the Tornio Anselmi factory, but the fat ****** italians never ansvers my mail. Are they just to lazy or to dumb to understand english ? Or is it that you are to dumb to speak Italian? |
|
#5
|
|||
|
|||
|
maybe, but it is normal to ansver your mail. Anyvay it is a very good lathe,
it looks like it is manufactured around the 60-70's. "Ahernwill" skrev i melding .net... "Håken Hveem" wrote in message No ansvers on my lathe problem yet.... Tried to e-mail several companys down in italy that sells lathes from the Tornio Anselmi factory, but the fat ****** italians never ansvers my mail. Are they just to lazy or to dumb to understand english ? Or is it that you are to dumb to speak Italian? |
|
#6
|
|||
|
|||
|
Anyvay it is a very good lathe, it looks like it is manufactured
around the 60-70's. Forget the manufacturer? The original company is long gone? Only the name remains? Get a copy from somewhere else? Like an individual that has a copy. Not as easy to find as a guy with a copy of the owners manual for some odd-year of air-cooled-VW but still do-able. Alvin in AZ |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: Sheldon WWII Army lathe and extras | Metalworking | |||
| New Mini Lathe | Woodturning | |||
| Kelton Balancer Review Draft--long | Woodturning | |||
| A Video for Beginners (a bit long) | Woodturning | |||
| My $20 lathe (well, sort of...) | Woodworking | |||
Linear Mode
