Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
How to bend aluminum trim
I have some left over aluminum trim. I am trying to bend some to cover
my patio door trim and frame so I will never have to paint it. I have been working with 2 inch angle iron and my hand but not happy with results. I cant afford an 8 foot bender. Can I build one cheaply? Can I take two pieces of 2 inch angle iron and hinge them together on the end? (Weld hinges on?) |
#2
|
|||
|
|||
"Don" wrote in message om... I have some left over aluminum trim. I am trying to bend some to cover my patio door trim and frame so I will never have to paint it. I have been working with 2 inch angle iron and my hand but not happy with results. I cant afford an 8 foot bender. Can I build one cheaply? Can I take two pieces of 2 inch angle iron and hinge them together on the end? (Weld hinges on?) Might work, but you could just rent a 10 footer from Home Depot for a day and be done with it... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Soldering aluminum tubing to steel sheet metal | Metalworking | |||
Inexpensive Trim Options? | Woodworking | |||
Welding Aluminum (WAS: Welding Magnesium) | Metalworking | |||
on a side note: Putting a bend in 6061 aluminum tubing | Metalworking |