Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Looking for resources, home brew dynamometer
I have a customer that among other things, rewinds obsolete air coil
electric motors. He has asked me about building a dyno so he can test motors to something other than 'yep, it turns' under power. Looking through SIC I only find one article on building a dyno. It looks to be a fair bit of work. As he called me while on the road today and the connection was bad, we couldn't really get into details. I am unsure what HP and torque the motors develop, though it's not a lot. I also don't know what rpm range he wants to test. Did a bit of Googling and didn't find a whole lot on small model engine sized dyno building. Anyone know about web resources for different approaches? Thanks, Jon Anderson |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cabinet, Furniture Design Software, Autodesk QuickCAD v8.0, Punch Software Home Design Architectural Series 18 v6.0, SOLID V3.5 - CABINET VISION, Cabinet Design Centre v7.0 - Cubit, 20-20 Kitchen Design V6.1,Cabinet Vision Solid, Planit Millennium II | Woodworking | |||
Homes in General, one question and a few ideas | Home Repair | |||
Old Man Winter Will Hit Us Tonight! | Home Repair | |||
modular home | Home Ownership | |||
30-0-30 Transformer, home brew or buy | Electronics Repair |