Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Trying to ID more parts/tools
Should be the last of the unknown stuff as I dig through these boxes of
equipment. Any guesses? http://members.aol.com/gto69ra4/whatsit/whatsit.html Thanks GTO(John) |
#2
|
|||
|
|||
1: Possibly kingpin bushings. 5: Possibly center piece for a shaft coupler.
6: Possibly tractor implement attachment clamps (John Deere?). 7. Definitely a gage for grinding Ford flathead valve stem ends to set the clearance. Small end for 60HP, large end for 85HP. 10. Definitely axle knockers. Used on early Fords and others to loosen keyed taper rear axles from the hubs. Don Young "GTO69RA4" wrote in message ... Should be the last of the unknown stuff as I dig through these boxes of equipment. Any guesses? http://members.aol.com/gto69ra4/whatsit/whatsit.html Thanks GTO(John) |
#3
|
|||
|
|||
6: Possibly tractor implement attachment clamps (John Deere?). 7. Definitely
That's what I was thinking too. Look like wheel clamps for old style hub/rim wheels. JW |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|