Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
O-ring tolerance
I'm making a part that has an O-ring in a seat. I.e., not in a groove.
The part will be "loose" most of the time & I want the O-ring to remain in its seat by having the seat diameter smaller than the O-ring's nominal diameter. I.e., it'll be squeezed into the seat. How much smaller can the seat be? The O-ring's nominal diameter is 0.7 & its thickness is 0.1 Thanks, Bob |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ring ring | UK diy | |||
10" dia flywheel ring gear, fit tolerance? | Metalworking | |||
Adding sockets to ring main/add another ring | UK diy | |||
5 band color coded resistor with no tolerance ring | Electronics | |||
When is a ring circuit not a ring circuit? | UK diy |