Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2
Default Slightly magnetic stainless steel rods?

I picked up several rods that seem to be made from stainless steel (as
everything else at that place had specks of rust).

However, they are slightly magnetic. Clearly much less magnetic than
regular steel, but magnetic enough to make magnetic darts barely stick
to them and not fall.

What material can it be?

The rods are about 1 3/4" diameter and several feet long.

i
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drilling 1.5 mm holes in 6 mm stainless rods? Chris Wilson[_2_] Metalworking 10 December 19th 10 05:36 AM
Stainless steel nuts galling on stainless steel bolts spaco Metalworking 15 April 12th 06 06:02 PM
stainless rods roberto Metalworking 3 May 23rd 05 12:00 AM
Stainless steel rods Lawrence Zarb UK diy 23 July 29th 04 05:56 PM
How reliable is non-magnetic test for Stainless Steel? Dan Musicant Metalworking 7 September 3rd 03 12:15 AM


All times are GMT +1. The time now is 12:31 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"