Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
ARGH!! can't drill small hole in copper
Offset the center of the drill
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
ARGH!! can't drill small hole in copper
Copper is very soft and needs to be peck drilled.
You take tiny amounts out at a time. Must also keep it cool. It tends to wad up on drills unless done correctly. Some swear that milk is the only thing to drill or bore copper. Martin On 1/10/2016 3:49 PM, wrote: Offset the center of the drill |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How can I drill a hole and keep drill straight? | UK diy | |||
Source for small copper hex rod | Metalworking | |||
putting some solder on a copper pin hole --- flux or not? | Home Repair | |||
pin hole leak in copper t join | Home Repair | |||
Pinprick hole in copper pipe | UK diy |