Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 5,888
Default need thread adapter for water faucet supply from europe to usa


"Larry Jaques" wrote in message
...
On Mon, 14 Sep 2015 21:18:01 +0000, LINDA
wrote:

BOUGHT A FAUCET FROM CHINA & NEED A WATER SUPPLY ADAPTER


Take the faucet with you to the plumbing store to match up. They may
have to make up lines for you if they truly are non-standard.

--
I merely took the energy it takes to pout and wrote some blues.
--Duke Ellington


The proper connection may not be obvious, like when a straight NPS
female thread with a rubber gasket seals to a tapered NPT male pipe
thread. Some household examples are sink and toilet feed lines and
kitchen and shower spray hoses.

http://www.usplastic.com/knowledgeba...contentkey=998

A similar apparent mismatch with the misleading name of "swivel" is
common in hydraulics. They have a compressed metal-to-metal seal that
swivels only before final tightening.
http://www.discounthydraulichose.com..._NPSM_s/47.htm
"A properly chamfered NPTF male will also seal with the NPSM female."

-jsw


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
European faucet adapter from metric to North American Dave Reid Metalworking 10 April 18th 19 03:18 PM
Ikea Faucet adapter required Roanin Home Repair 4 February 20th 12 02:52 AM
Unable to break thread on toilet water supply valve [email protected] Home Repair 21 August 12th 07 09:45 PM
Rock drilling tools--DTH hammer and bit, open pit, surface, underground ming, quarrying, tunnelling equipment, drill rod, drag bit, taper rod,taper bit, water well drilling, button bit, thread bit, shank adapter for rock drills, drill tube, drill pip [email protected] Home Ownership 0 September 13th 06 09:50 AM
Thread Adapter Harry Pye Woodturning 2 May 23rd 06 06:39 AM


All times are GMT +1. The time now is 04:24 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"