Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,115
Default Once again !

Y'all have certainly heard how nasty it got in our part of the country
night before last with several inches of snow on top of the ice - several
miles of I-40 was a parking lot for 24 hours or more . Once again I took it
upon myself to get Rusty to work making sure we could get out . Imagine my
surprise , when I got up to the end of the driveway someone else has been
clearing the road ! Turns out my new neighbor has a spankin' new Kubota 4WD
tractor , and he's movin' snow with his front loader . So we teamed up , he
pushes a path then I come along behind him and blade the crud off to the
side . The only stretch that has any ice is where the melt ran across the
road between my drive and the intersection where the Little Dirt Road meets
the Big Dirt Road . There is one patch up on the flat that's not totally
clear , I had some fuel supply problems and had to work on the machine -
probably some ice crystals in the fuel , that gas has been in my can for a
couple of months and a lot of temp cycling .

--
Snag


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 06:12 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"