Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
MOT question
I just salvaged a transformer from a microwave and have a question about
the secondary windings . This one has 2 , one apparently a low voltage since it has relatively few windings abt 6-10 , can't really tell of 16 or 18 guage wire . The other a high voltage winding of abt 28-30 guage or so . The low voltage winding I can check with my voltmeter , but the HV winding I'm a bit leery of . I'm not a big fan of getting electrocuted , and wonder if someone has any idea of the voltage this winding might produce . I'm pretty sure it's not in the KV range , but even a few hundred can totally ruin your day ... -- Snag |
Thread Tools | Search this Thread |
Display Modes | |
|
|