Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Repairing stripped metric sheetmetal threads
"Steve W." writes: Heavy chunk of steel behind hole, use a ball peen hammer around the current hole to shrink the hole enough to be re-threaded. Ha! At last, a real metalworking solution! :-) -- Mike Spencer Nova Scotia, Canada |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Repairing stripped metric sheetmetal threads
"Mike Spencer" wrote in message "Steve W." writes: Heavy chunk of steel behind hole, use a ball peen hammer around the current hole to shrink the hole enough to be re-threaded. Ha! At last, a real metalworking solution! :-) -- Mike Spencer Nova Scotia, Canada And with a HAMMER to boot! Yay! Note the applause from the peanut gallery, ay? ;)} |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question about Metric Threads... | Metalworking | |||
Stripped threads on tablesaw arbor bolt holes. Repair how? | Woodworking | |||
Steam vent radiator threads stripped | Home Repair | |||
repairing stripped threads with JB Weld | Metalworking |