Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
"Bob La Londe" fired this volley in
: So you are saying the average refrigeration vacuum pump isn't going to cut it? Most pull about 29 inches (give or take depending on quality) pretty quickly, but will run over night to get past that. A really well-maintained fridge pump with fresh oil will get down _around_ where you need to be for vapor deposition processes, but not easily, and usually not quite. You need below 2u Hg to be effective, and most Robinaires won't get below ten once they're a couple of years old. I mean, my Robinair thermistor gauge won't read below 50! LLoyd |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Stainless Steel Gold-Plating Pendant KP0965 Supply | UK diy | |||
Small parts gold plating | UK diy | |||
Surplus Gold Plating Solution, Electrodless | Electronics Repair | |||
Gold plating car emblems | Metalworking | |||
Nickel / Gold plating question | Metalworking |