Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
CAD for simple 3-D metal & wood projects?
On Saturday, November 23, 2013 8:00:04 PM UTC-8, Gunner Asch wrote:
On Sat, 23 Nov 2013 12:08:25 -0800, pyotr filipivich wrote: Gunner Asch on Sat, 23 Nov 2013 02:00:51 -0800 typed in rec.crafts.metalworking the following: On Thu, 21 Nov 2013 11:33:32 -0600, Swingman wrote: On 11/21/2013 11:22 AM, Richard wrote: SketchUp actually has the same internal precision as AutoCad, 1/1000th of an inch. Look it up ... 1/1000th inch? Is that all??? LOL Good enough for AutoCAD, and certainly well within the specifications of the OP's original request. Some of us have to work to .00005" or smaller. half a ten thousandths of an inch? Yoicks, you're starting to get into the area where you can tell where it was, or how big it was, but not both. -- pyotr filipivich "With Age comes Wisdom. Although more often, Age travels alone." Ayup...aerospace requires 50 millions or half 10ths all the time. Which is damned hard to do with machines that hold +/- 2 tenths Gunner __ "A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects." - Heinlein --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com You don't do it at all, Wieber You've never done it. How many years did I work here and do it? http://www.pyramidprecision.com/equipment-list Show us some pictures of your **** hole manufactured home filled with roommates because you can't pay your tiny overhead. Show use some more pictures of your dirt floor, non temperature controlled "shop" where you claim to do it. Name a shop you have worked for as a machinist that can do it. Show us your inspection equipment with dirt all over it again. You're nothing but a poser, Wieber. I know it, you know it and many others know it as well. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CAD for simple 3-D metal & wood projects? | Woodworking | |||
CAD for simple 3-D metal & wood projects? | Metalworking | |||
CAD for simple 3-D metal & wood projects? | Metalworking |