 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Bad U-joint?
I have a problem that I noticed with my pick-up truck.
The problem is that at certain speeds, such as 40-45 MPH, I feel vibration if I step on the gas pedal and try to accelerate. If I let go of the gas pedal, vibration stops even as the truck continues to drive forward. It has gotten worse lately. I have thought a lot on what could cause it. It does not seem to be related to the engine RPM. I watch the RPM vary and the vibration does not vary with it. What could it be? i |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (1/1) | Woodworking Plans and Photos | |||
| T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (0/1) | Woodworking Plans and Photos | |||
| T+G Joint From Wreck Discussion - Close Up Of Middle Of Joint Line - Middle Of Joint Line From Above.jpg (1/1) | Woodworking Plans and Photos | |||
| Need help finding a "Rosette" joint (toothed, round joint) | Metalworking | |||
| Scarf joint or butt joint your choice on crown molding? | Woodworking | |||
Threaded Mode
