Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
KJ model J or ?
I recently purchased a KJ model J saw. Looking over the internet manuals
shows that there are two blade widths used, 3/4" or 1". Can either blade width be used on a model J. The parts list shows two different wheels that are used, one for the 3/4" and one for the 1". I can not find a part number on the wheels. I did measure the width of the wheel to the shoulder where the back of the blade approximately rides and it is 11/16". The throat of the 3/4" blade teeth are about even with the bottom edge of the wheel. The 1" blade would therefore be about 1?4" away from this edge. Does anybody have some info on this? -- posted from http://www.polytechforum.com/metalwo...or-578242-.htm using PolytechForum's Web, RSS and Social Media Interface to rec.crafts.metalworking and other engineering groups |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Toshiba model Satellite A205, model PSAF3U-0NROOV laptop problems | Electronics Repair | |||
Model engines | Metalworking | |||
Jet model 836 | Metalworking | |||
Compaq V70 model 621 | Electronics Repair | |||
Ge tv/vcr Model 13tvro1 | Electronics Repair |