Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Flange in shim stock
I want to take a piece of .030 brass shim stock,
put a hole in the center, then press the material around the hole to make a flange. Finished hole opening is .6". It will then be used to slide over a cylinder. What's a good way to create the flange? Best I can think of so far is a "tapered punch" and something to hold the shim with a hole in it. Only need to make one or two. | | | -- -- | | | Thanks, Wayne D. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Shim Stock | Metalworking | |||
Shim Stock | Metalworking | |||
Shim Stock | Metalworking | |||
shim stock needed | Metalworking | |||
Shim Stock (Small Quantities) | Metalworking |