I was looking for AR 15 receivers to buy but I haven't found any available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced a
CAD model yet.

RogerN

On 2013-02-02, RogerN wrote:
I was looking for AR 15 receivers to buy but I haven't found any available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced a
CAD model yet.

Let me know if you find one. Also I wonder how interchangeable they
actually are.

"Ignoramus4463" wrote in message
...

On 2013-02-02, RogerN wrote:
I was looking for AR 15 receivers to buy but I haven't found any
available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers
and
other gun parts?
I did a Google search and I keep finding mentions but nothing has
produced a
CAD model yet.

Let me know if you find one. Also I wonder how interchangeable they
actually are.

Found
www.ar15.com/content/manuals/ar15cadfiles.zip

AK
http://pookieweb.dyndns.org:61129/AK/docs/templates.htm

RogerN

Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN

RogerN wrote:

Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN

Don't forget anodizing, time to fabricate (or cost to buy) fixture
plates, tooling, etc. I prefer the 30% forgings from Tactical Machining,
more to do = more fun, but still a proper broached magwell. Takes a full
day to machine one (carefully, setup time, etc.), and a half day to
anodize. Not sure on costs due to the scarcity of any parts at the
moment.

RogerN wrote:
Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN



You won't have an "Assault Rifle" unless you also do some other creative
machining to make it selective fire.
Not hard to do if you can find the proper pieces.

--
Steve W.

"Steve W." wrote:

RogerN wrote:
Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN



You won't have an "Assault Rifle" unless you also do some other creative
machining to make it selective fire.
Not hard to do if you can find the proper pieces.

--
Steve W.

Well, it will get you an EBR Evil Black Rifle, or any color you choose
for that matter http://wpnet.us/red_devil_small_right.jpg

Pete C. wrote:
"Steve W." wrote:
RogerN wrote:
Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN


You won't have an "Assault Rifle" unless you also do some other creative
machining to make it selective fire.
Not hard to do if you can find the proper pieces.

--
Steve W.

Well, it will get you an EBR Evil Black Rifle, or any color you choose
for that matter http://wpnet.us/red_devil_small_right.jpg


Nope, not an evil rifle to me. Not the prettiest but not evil.

A person with a decent mill and a small lathes can make every part.
Rifling the barrel isn't fun but can be done. OR take a barrel from
something else and do some work to make it fit.

--
Steve W.

"Pete C." wrote:

"Steve W." wrote:

RogerN wrote:
Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN



You won't have an "Assault Rifle" unless you also do some other creative
machining to make it selective fire.
Not hard to do if you can find the proper pieces.

--
Steve W.

Well, it will get you an EBR Evil Black Rifle, or any color you choose
for that matter http://wpnet.us/red_devil_small_right.jpg


A local gun shop is using Cerakote on guns.

http://www.facebook.com/photo.php?fbid=523085101043604&set=a.4521212981399 85.106891.131094280242690&type=1&relevant_count=1

On Sun, 3 Feb 2013 22:50:17 -0600, "RogerN" wrote:


Been looking at the 80% finished receivers, some of them only need some
milling in the center at the trigger group, looks simple enough. A pocket
at 1.249" deep, .690" wide and connected to another pocket at .630' deep.
Also have to machine a .312 wide slot at the bottom of the 1.249" deep slot
for the trigger to go through. Seems the most time consuming part is
finding one available!

So you buy a parts kit minus lower, an unfinished receiver, and you can have
a working "Assault Rifle" with an hour or two machining plus assembly time
for maybe $500 or so.

RogerN


Pretty much.

However....those parts kits are "out of stock" all across this great
land.

The general estimate is that there have been some 9 MILLION ARs sold
in 2012...and probably 50% more sold as kits.

The US has the largest private military in the world, by several
orders of magnitude.

And if they decide to take out Enemies, foreign and domestic....there
is no one, nothing..that can stop them. Period.


The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie

On Monday, February 4, 2013 8:10:22 AM UTC-8, Gunner wrote:
On Sun, 3 Feb 2013 22:50:17 -0600, "RogerN" wrote:



The US has the largest private military in the world, by several

orders of magnitude.



And if they decide to take out Enemies, foreign and domestic....there

is no one, nothing..that can stop them. Period.




haha --- wishful thinking!

you underestimate the might of the US Government.


But so did Weaver and Koresh.

I don't care how many buddies with pop guns that shoot really, really fast, you have, your toast if you get nasty with "Big Brother".

One hell'uva dream!

Heck, test it out ... try not paying your taxes for a while and then thumb your nose at the IRS!

good luck with that.

On Mon, 4 Feb 2013 15:02:14 -0800 (PST), wrote:

On Monday, February 4, 2013 8:10:22 AM UTC-8, Gunner wrote:
On Sun, 3 Feb 2013 22:50:17 -0600, "RogerN" wrote:



The US has the largest private military in the world, by several

orders of magnitude.



And if they decide to take out Enemies, foreign and domestic....there

is no one, nothing..that can stop them. Period.




haha --- wishful thinking!

you underestimate the might of the US Government.

You seem to have some issues with understanding the difference between
2.75 million government workers and 35 million ****ed off citizens.

Math wasnt your strong point was it?


But so did Weaver and Koresh.

Lets see...Weaver...a total of 5 people kept the FBI and ATF at arms
length for how long again? And the death toll was what again? And
how much money did Weaver get from the Feebs when it was all over?

Now Koresh..how many adults died in that little fiasco and how long
did it keep the government at arms length? Lets see...55
adults..only a few of whom were armed and 28 children against the FBI,
The ATF and Delta Force for how long? 4 dead ATF and 16 wounded ATF
and 6 killed residents in the surprise attack. 50 days wasnt it and
it involved the ultimate use of tanks and fire to take out the
cultiists. And tied up the FBI and ATF for nearly 2 months.
And the fall out from that has still crippled the ATF

Think that would happen again?

VBG

The lesson has been learned and taught widely among the People.





I don't care how many buddies with pop guns that shoot really, really fast, you have, your toast if you get nasty with "Big Brother".

One hell'uva dream!

Heck, test it out ... try not paying your taxes for a while and then thumb your nose at the IRS!

good luck with that.

You seem to forget the words of one of the Founders....

" "We must, indeed, all hang together, or most assuredly we shall all
hang separately." Ben Franklin

VBG

What are you Leftwingers going to do to "hang together"?

VBG

Bet you all hang seperately.

VBG

But in really big groups!

VBG

Gunner

The methodology of the left has always been:

1. Lie
2. Repeat the lie as many times as possible
3. Have as many people repeat the lie as often as possible
4. Eventually, the uninformed believe the lie
5. The lie will then be made into some form oflaw
6. Then everyone must conform to the lie

"Ignoramus4463" wrote in message
...

On 2013-02-02, RogerN wrote:
I was looking for AR 15 receivers to buy but I haven't found any
available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers
and
other gun parts?
I did a Google search and I keep finding mentions but nothing has
produced a
CAD model yet.

Let me know if you find one. Also I wonder how interchangeable they
actually are.

There is a file called ARblank.pdf that gives instructions for machining
from the forging blank.

I also saw a "Fire Control Pocket with a DRO.pdf" file that gives
instructions useful for the 80% completed receivers.

RogerN

RogerN wrote:

I was looking for AR 15 receivers to buy but I haven't found any available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced a
CAD model yet.

RogerN

Look at cncguns.com

On Sat, 2 Feb 2013 05:41:22 -0600, "RogerN" wrote:

I was looking for AR 15 receivers to buy but I haven't found any available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced a
CAD model yet.

RogerN

Not sure this is what your are looking for.

http://www.biggerhammer.net/ar15/cad/

Just finished making 90 lower receivers at work.
Will be making 500 more very soon.

wrote in message ...

On Sat, 2 Feb 2013 05:41:22 -0600, "RogerN" wrote:

I was looking for AR 15 receivers to buy but I haven't found any
available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers
and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced
a
CAD model yet.

RogerN

Not sure this is what your are looking for.

http://www.biggerhammer.net/ar15/cad/

Just finished making 90 lower receivers at work.
Will be making 500 more very soon.

Got any for sale? I haven't had any luck finding any in stock anywhere.

RogerN

On Sat, 2 Feb 2013 09:31:55 -0600, "RogerN" wrote:

wrote in message ...

On Sat, 2 Feb 2013 05:41:22 -0600, "RogerN" wrote:

I was looking for AR 15 receivers to buy but I haven't found any
available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers
and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced
a
CAD model yet.

RogerN

Not sure this is what your are looking for.

http://www.biggerhammer.net/ar15/cad/

Just finished making 90 lower receivers at work.
Will be making 500 more very soon.

Got any for sale? I haven't had any luck finding any in stock anywhere.

RogerN

As far as I know they are all spoken for.
The biggest customers are police personnel, assistant DA's and a
couple of local pawn shops that assemble the AR15's to sell.

Here is a like to one of the pawn shops
http://cashinaflashpawnshop.com

I thought the Fed wanted to reduce the number
of weapons designed only to kill large number
of people, on the streets? And, you're making
MORE of them? 500 more!

MASH series Frank Burns were here, he'd ask:
"Don't you mindlessly do every thing Our Nation's
Leader says? Isn't it patriotic to obey, unquestion-
ingly? How can we be free, if we all do things
that we're not told to do?"

If RCM's Christopher Young were here, he'd say
"Can't keep good Americans down."

Christopher A. Young
Learn more about Jesus
www.lds.org
..

wrote in message
...

Not sure this is what your are looking for.

http://www.biggerhammer.net/ar15/cad/

Just finished making 90 lower receivers at work.
Will be making 500 more very soon.

RogerN wrote:

I was looking for AR 15 receivers to buy but I haven't found any available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced a
CAD model yet.

RogerN

cncguns.com

"Pete C." wrote in message ...

RogerN wrote:

I was looking for AR 15 receivers to buy but I haven't found any
available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers
and
other gun parts?
I did a Google search and I keep finding mentions but nothing has
produced a
CAD model yet.

RogerN

cncguns.com

The searches lead me to cncguns.com but it doesn't seem to work right now.

RogerN

On Feb 2, 3:41*am, "RogerN" wrote:
I was looking for AR 15 receivers to buy but I haven't found any available,
for some strange reason so called "assault rifles" and parts have been
selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers and
other gun parts?
I did a Google search and I keep finding mentions but nothing has produced a
CAD model yet.

RogerN

I guess you have never heard of GRABCAD?

http://grabcad.com/library?per_page=20&query=ar15

email me, I have one choose .igs,.mc4,.dwg
karltownsnedATembarqmail.com

If you're making a few (100), I'd suggest a 0% forging. dsarms.com
has them for like $26 if they didn't raise prices in the recent
panick. There are many other sources. I just did a group buy on
1919A4.com

There are many tutorials on building the forging out there. Some of
the best on weaponsguild.com a guy there sells a holding fixture for
the forging.

Karl

Do a search on this group. I posted a link to CAD files a while back. I
don't know if the site is still up, but its out there.

"RogerN" wrote in message
m...
I was looking for AR 15 receivers to buy but I haven't found any
available, for some strange reason so called "assault rifles" and parts
have been selling out everywhere.

Anyone know where to download CAD models of AR (or other gun) receivers
and other gun parts?
I did a Google search and I keep finding mentions but nothing has produced
a CAD model yet.

RogerN