Home |
Search |
Today's Posts |
![]() |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.crafts.metalworking
|
|||
|
|||
![]()
Hey guys!
We live in an area with little television reception. I've avoided paying for a dish, as I don't watch all that much TV. We get a PBS station, along with one of the Fox network stations. Good enough for us, as we get news and some interesting scientific shows. Ok, now my question. I have a splitter in a room that is not heated. As weather turned colder, I started getting a lot of blue screen on the TV. The colder it got, the worse the reception, until it got to the point where the TV was off more than it was on. About a week ago, I lit the boiler in the room where the splitter resides. Suddenly, great reception. When the room cooled off, after turning off the boiler, it was back to blue screen once again. Heated the splitter and got service back. When it cooled down, it was, once again, lost. Replaced the old splitter with a new one, which improved reception, but did not eliminate the problem. Finally hung a small light bulb near the splitter, which I figured would keep it warm. Sure enough, we now have great (albeit limited) reception once again. Anyone care to offer a reason for poor performance when a splitter cools off too much? I would suggest that it was in the 40 degree range, not freezing. Why would it cooling off make a difference? I fully expected that it wouldn't be temperature sensitive. Harold |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Q splitter | Woodworking | |||
log splitter | Home Repair | |||
RCA HV splitter | Electronics Repair | |||
TS Splitter | Woodworking | |||
log splitter | Home Repair |