 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Building home made pan/box brake
Any one have any diagrams? I am attempting to build a pan brake to bend 1/8 sheet metal up to 36 inches wide manuelly. Using 4 x 7.3 channel iron and 1/4 x 4 angle. Will use 1/2 x 3 F.B. where needed. Thanks.
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 9-story apartment building made of WOOD | Woodworking | |||
| Forklift leaking brake fluid from right brake drum | Metalworking | |||
| Home Building Renovation Remodeling Green Home Contractor. | Home Repair | |||
| Made a little brake die from some scrap laying around | Metalworking | |||
| Whats this Building made of? | UK diy | |||
Threaded Mode
