Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,712
Default Battery tester, home made (uses metal wire)

Using six or so inches of 12 or 14 solid copper wire, and a
PR-2 flash light bulb, this device can be used.
http://tinypic.com/r/2i77h92/6

By bending the wire a bit, you can test any cells from
AAAA to D. After testing a few cells, you can get a
rough idea if the battery is useful, by how bright the bulb
glows.

Voltage available doesn't necessarily mean the battery is
useful. I found this out years ago, with carbon zinc cells
that read 1.5 volts, but which do not power a device.

Christopher A. Young
Learn more about Jesus
www.lds.org
..


  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 934
Default Battery tester, home made (uses metal wire)

"Stormin Mormon" wrote in message
...
Using six or so inches of 12 or 14 solid copper wire, and a
PR-2 flash light bulb, this device can be used.
http://tinypic.com/r/2i77h92/6

By bending the wire a bit, you can test any cells from
AAAA to D. After testing a few cells, you can get a
rough idea if the battery is useful, by how bright the bulb
glows.

Voltage available doesn't necessarily mean the battery is
useful. I found this out years ago, with carbon zinc cells
that read 1.5 volts, but which do not power a device.


True, no load voltage is unreliable, BUT using your method, you will have to
keep in mind a *reference briteness* for each sized battery!! Which might
not be so bad for that limited range of sizes.....

A radio-shack-type tester varies the load for each type battery, essentially
"normalizing" the meter, so's you don't have to make any power translations.
And also, the radio shack type testers take a very wide range of batteries,
from button cells to 22 V jobbies.

For you greenies:
A battery that "fails" in one context may be quite adequate in another
context. For example, I can take a dying AA battery, put it in my wireless
moose, and it will run the mouse for sometimes months!!! So in light-duty
applications, you can really milk the last erg of energy from some cells.

AAAA battery?? Must be the diameter of a pencil lead....
--
EA



Christopher A. Young
Learn more about Jesus
www.lds.org
.




  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 113
Default Battery tester, home made (uses metal wire)

On Sat, 18 Aug 2012 15:17:14 -0700, Winston_Smith
wrote:

"Stormin Mormon" wrote:

Using six or so inches of 12 or 14 solid copper wire, and a
PR-2 flash light bulb, this device can be used.
http://tinypic.com/r/2i77h92/6

By bending the wire a bit, you can test any cells from
AAAA to D. After testing a few cells, you can get a
rough idea if the battery is useful, by how bright the bulb
glows.

Voltage available doesn't necessarily mean the battery is
useful. I found this out years ago, with carbon zinc cells
that read 1.5 volts, but which do not power a device.

Christopher A. Young


Tech America, a now extinct division of Tandy/Radio Shack, used to
give out a little clamp-on style tester that was very similar and also
did a load test. Free with any purchase sometimes, just bring in the
coupon and pretend to look around at others. Got a couple of them.

This is what it looks like if anyone ever comes across one.
http://www.buy.com/prod/tech-america...227687703.html
Contacts on the side for 9V.

I have that but prefer:
http://www.sync-blog.com/sync/2008/0...-dollar-1.html

They also used to give away a pretty nice stainless steel pocket
knife. The edges were safe to give to small children as toys but if
you spend a career getting them sharp, they are very nice. Got
several of those too.

--- Posted via news://freenews.netfront.net/ - Complaints to ---

---

Gerry :-)}
London,Canada
  #4   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 87
Default Battery tester, home made (uses metal wire)

On Sat, 18 Aug 2012 20:01:14 -0400, wrote:

On Sat, 18 Aug 2012 15:17:14 -0700, Winston_Smith
wrote:

"Stormin Mormon" wrote:

Using six or so inches of 12 or 14 solid copper wire, and a
PR-2 flash light bulb, this device can be used.
http://tinypic.com/r/2i77h92/6

By bending the wire a bit, you can test any cells from
AAAA to D. After testing a few cells, you can get a
rough idea if the battery is useful, by how bright the bulb
glows.

Voltage available doesn't necessarily mean the battery is
useful. I found this out years ago, with carbon zinc cells
that read 1.5 volts, but which do not power a device.

Christopher A. Young


Tech America, a now extinct division of Tandy/Radio Shack, used to
give out a little clamp-on style tester that was very similar and also
did a load test. Free with any purchase sometimes, just bring in the
coupon and pretend to look around at others. Got a couple of them.

This is what it looks like if anyone ever comes across one.
http://www.buy.com/prod/tech-america...227687703.html
Contacts on the side for 9V.

I have that but prefer:
http://www.sync-blog.com/sync/2008/0...-dollar-1.html

They also used to give away a pretty nice stainless steel pocket
knife. The edges were safe to give to small children as toys but if
you spend a career getting them sharp, they are very nice. Got
several of those too.

--- Posted via news://freenews.netfront.net/ - Complaints to ---

---

Gerry :-)}
London,Canada


I got both of them. Use the old Rat Shack one more often though.

Shrug

Gunner

One bleeding-heart type asked me in a recent interview if I did not
agree that "violence begets violence." I told him that it is my
earnest endeavor to see that it does. I would like very much to ensure
- and in some cases I have - that any man who offers violence to his
fellow citizen begets a whole lot more in return than he can enjoy.

- Jeff Cooper
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
home made (metal) rail road car Stormin Mormon Metalworking 7 October 26th 11 01:29 AM
Battery Tester The Medway Handyman[_2_] UK diy 25 August 16th 10 07:06 PM
Battery tester Edward[_7_] UK diy 11 September 15th 09 11:49 PM
Battery Tester Too_Many_Tools Electronics Repair 9 October 24th 07 03:37 AM
Home battery tester: measures voltage or current? Jon D UK diy 38 July 8th 06 04:37 AM


All times are GMT +1. The time now is 10:44 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"