 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
anyone recognize what this (heater core?) fits? it's quite old
here are some photos, please be sure to put the whole link on one line so you actually arrive at the destination: http://i1171.photobucket.com/albums/...ercoreback.jpg http://i1171.photobucket.com/albums/...rcorefront.jpg whatever these fit, it hasn't been made in many years, brass castings like that were uncommon even by the 50s. |
|
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
|
anyone recognize what this (heater core?) fits? it's quite old
Bill wrote:
here are some photos, please be sure to put the whole link on one line so you actually arrive at the destination: http://i1171.photobucket.com/albums/...ercoreback.jpg http://i1171.photobucket.com/albums/...rcorefront.jpg whatever these fit, it hasn't been made in many years, brass castings like that were uncommon even by the 50s. Looks more like a radiator for a small engine than a heater core. Something along the lines of a Hart-Parr or similar -- Steve W. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
![Bill[_42_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Linear Mode
