 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
need Houston tracker system actuator help
Does anybody have info on how to service a houston tracker system actuator.The actuator is stuck all the way up and wont go down though motor works good actuator just spins,cant get it to unlock. even after putting a little weight on it to help.limit switches work.dont know how to take apart. motor comes off though.Wont go up and down...
Last edited by chip7 : April 30th 12 at 03:22 AM |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| metal working! | Metalworking | |||
| metal working | Metalworking | |||
| metal working | Metalworking | |||
| Metal working tools for sheet metal... slightly different take than usual | Metalworking | |||
Linear Mode
