Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Help with Cosmoline
On Thu, 22 Mar 2012 11:01:32 -0700 (PDT), Stanley Schaefer
wrote: On Mar 21, 7:30*pm, G. Morgan wrote: Stanley Schaefer wrote: find a dealer in Moisin-Nagants and offer to clean out some barrels for them in return for the goop. Do you know where to buy a bent bolt handle for the MN by chance? The one company I found that makes them are out of stock/backordered for months. You can use a set of blocks to forge (red hot and bend it) it down, you can cut it off, leaving a stump and then a new on the lathe and weld it on. Use a flat piece of steel and make a "butter knife bolt handle". Many solutions. See: http://www.brownells.com/.aspx/lid=1...r-Bolt-Handles http://216.197.108.5/cook/gunDisplay.cfm?gun_ID=5 -- Cheers, John B. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with Cosmoline | Metalworking | |||
Help with Cosmoline | Metalworking | |||
Hints from Heloise - Cleaning Cosmoline From Tool Tables | Woodturning |