Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Thread mills
I need to do some thread milling, never did it before!! I need to cut
2- 1-1/4"-11.5 NPS exteranl threads, a 1-3/4"-16 external and a 1-7/8"-18 internal thread. I found a thread mill for 11.5 NPS but in the catalog it's listed as internal only, why? Any place I can get this at under $300 bucks that MSC wants? Remove 333 to reply. Randy |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Machine Thread to Wood Thread Dowel Screw | UK diy | |||
Another 4-start thread question - 1/4" internal thread | Metalworking | |||
Cheep Face Mills / Indexable End Mills? | Metalworking | |||
Questions regarding thread diameter and pitch for special design case with limited thread length | Metalworking | |||
face mills/shoulder mills | Metalworking |