Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Need odd 12V pwr supply
Runs from auto power.
Need: regulated 12v, no spikes when vehicle is started 5V, @ 2 amps (USB) 5V, @ 100-200ma, (USB) the 200ma needs to be absolutely no higher than 200ma under any circumstances And, this last output needs a timer, that will shut it off for 10 or so seconds, prefereably a programmable time, 12:00am, or, every 24 hours. thanks gary |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
ATX power supply to bench supply conversion | Electronics Repair | |||
Looking for 5P+ rod supply | Metalworking | |||
Gas supply | UK diy | |||
Dishwasher Water Supply & Electric Oven Electric Supply | UK diy | |||
Can you put a water supply pipe and a gas supply pipe in the same conduit? | UK diy |