Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
finishing aluminum
Any suggestions for finishing an aluminum bracket?
(bout 3" sq.) No critical dimensions or anything. Just want to get rid of witness marks and shine up the piece so it doesn't look too rough. I'm thinking something like flap wheels or some of that 3M stuff. Tanks, DOC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Joining aluminum to aluminum mesh | Metalworking | |||
Cast aluminum with embeded 6061-T6 aluminum rods | Metalworking | |||
finishing basement aluminum vs. wood | Home Repair | |||
U.S. tests new ceramic armor made of aluminum oxynitride (clear aluminum) | Metalworking | |||
aluminum finishing? | Metalworking |