Though I use lots of kill filters I cannot figure out how to filter
out cross posts in Agent. And the number of and subjects of posts from
other newsgroups is making it really hard to read rcm. So can anyone
tell me how to filter out crossposts using Agent?
Thanks,
Eric

On Wed, 31 Aug 2011 16:46:51 +0000 (UTC), wrote:

Though I use lots of kill filters I cannot figure out how to filter
out cross posts in Agent. And the number of and subjects of posts from
other newsgroups is making it really hard to read rcm. So can anyone
tell me how to filter out crossposts using Agent?
Thanks,
Eric

Which version of Agent?


--
"The danger to America is not Barack Obama but a citizenry
capable of entrusting a man like him with the Presidency.
It will be far easier to limit and undo the follies of an
Obama presidency than to restore the necessary common sense
and good judgment to a depraved electorate willing to have
such a man for their? president.. Blaming the prince of the
fools should not blind anyone to the vast confederacy of
fools that made him their prince".

wrote:

Though I use lots of kill filters I cannot figure out how to filter
out cross posts in Agent. And the number of and subjects of posts from
other newsgroups is making it really hard to read rcm. So can anyone
tell me how to filter out crossposts using Agent?
Thanks,
Eric

Click "next?"

Good Luck!
Rich

On 2011-08-31, wrote:
Though I use lots of kill filters I cannot figure out how to filter
out cross posts in Agent. And the number of and subjects of posts from
other newsgroups is making it really hard to read rcm. So can anyone
tell me how to filter out crossposts using Agent?

I don't know Agent specifically, but the usual trick is to count
commas in the "Newsgroups: " header. One comma is two newsgroups, two
commas is three an so forth.

My newsreader allows scoring, so I can allocate say -10 points
for one comma, another -10 points for two commas (separate test) and so
on -- and for the desired cross-posts (e.g. the weekly puzzles which are
posted to three newsgroups, I take the "From: " header and give
something like +50 to override the total of the negatives from the
commas.

Hopefully, someone else who *uses* Agent can tell you how to do
this. IIRC, I think that it needed a bit of trickery to add
"Newsgroups: " to the headers on which you can filter.

Good Luck,
DoN.

--
Remove oil spill source from e-mail
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

On 9/2/2011 9:58 PM, Steve Ackman wrote:
On Thu, 1 Sep 2011 11:29:22 +0000 (UTC), Kelly D. Grills wrote:
* DoN. :

I don't know Agent specifically, but the usual trick is to count
commas in the "Newsgroups: " header. One comma is two newsgroups, two
commas is three an so forth.

FYI the Xref header is preferred over the Newsgroups header.

http://www.slrn.org/docs/slrn-FAQ-4.html#ss4.14

From one slrn bigot to another. :-)

Zealot, not bigot. ;-)


at least with thunderbird, I just discovered I could put a custom filter
type of "headers" into my filter and then delete messages posted to the
usual annoying places - reduced my daily number of messages from
hundreds to a few dozen that seem to be somehow related to the topic of
metal working

I'm not addressing you personally, Eric, but developing a practice of never
replying to the morons with agendas would deny them of the attention they
crave.. and eventually they'll fade away.

This would include ignoring the MWAs when they ask for metalworking help..
by seeing the value of their eventual absence.

Then, finally, those with actual metalworking interests could resume
metalworking discussions without all the added bull****.

--
WB
..........


wrote in message
...
Though I use lots of kill filters I cannot figure out how to filter
out cross posts in Agent. And the number of and subjects of posts from
other newsgroups is making it really hard to read rcm. So can anyone
tell me how to filter out crossposts using Agent?
Thanks,
Eric

On Sat, 3 Sep 2011 00:01:13 -0400, "Wild_Bill"
wrote:

I'm not addressing you personally, Eric, but developing a practice of never
replying to the morons with agendas would deny them of the attention they
crave.. and eventually they'll fade away.

This would include ignoring the MWAs when they ask for metalworking help..
by seeing the value of their eventual absence.

Then, finally, those with actual metalworking interests could resume
metalworking discussions without all the added bull****.
Greetings Bill,
I don't reply to any of those messages. Or read them. Especially when
so many of them have some sort of made up name that's aimed at
insulting someone. BTW, do you have, or did you have, anything to do
with KPIG?
Eric

I hadn't heard of that station until you mentioned it, Eric.. funny callsign
though.

I was interested in hearing some programming (I'm in western PA), but it
seems that a subscription is required, and I didn't see if a subscription
feed would be commercial-free, so I lost interest.

Yep, same as you.. I just hit the delete key for all the crap posts.

--
WB
..........


wrote in message
...
Greetings Bill,
I don't reply to any of those messages. Or read them. Especially when
so many of them have some sort of made up name that's aimed at
insulting someone. BTW, do you have, or did you have, anything to do
with KPIG?
Eric

On Wed, 31 Aug 2011 16:46:51 +0000 (UTC), wrote:

Though I use lots of kill filters I cannot figure out how to filter
out cross posts in Agent. And the number of and subjects of posts from
other newsgroups is making it really hard to read rcm. So can anyone
tell me how to filter out crossposts using Agent?
Thanks,
Eric


I am using Agent 3.1 here.
Menu:
FolderDefault PropertiesCrosspost Managementcheck "enable crosspost
management" Skip the header(do not retrieve it)then clear the
cache of cross posted messages.

HTH
Dave