 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
DIY hex broach
How about drilling/countersinking and threading a hole in
the rod, then epoxy a flathead allen screw in? Another solution is to face the rod, and drill three axial blind holes in an equilateral pattern, just a little oversize of 1/8". Then make a wrench with three holes 0.126", with short .125" dowel pins inserted. Two-pin wrenches are more common, but the three-pin variety has better stability... |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| DIY hex broach | Metalworking | |||
| Looking for someone who can broach Grob splines | Metalworking | |||
| Broach for motorcycle gear/brake splined shafts? | Metalworking | |||
| FA: Keyway Broach Set | Metalworking | |||
Linear Mode
