 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Source for Left Hand, 135 degree stub/machine screw drill in 5/64?
Lots of 118 degree, and the sites with 135 use UPS, so for about $4
in drills, I spend about $10 in shipping. Does any supplier with USPS shipping have a 135 degree screw machine drill in 5/64? I need to drill out a snapped hollow point retaining screw (6x48) out of a Lyman 25 caliber mould. With ant luck, the LH drill will walk the screw out. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Flip Kwikset left-hand lock knob to right-hand keyhole reversal | Home Repair | |||
| 3/8" UNF countersunk left hand screw? | Metalworking | |||
| source for left-hand thread drill chuck locking screws? | UK diy | |||
| Beginner - making accurate 90 degree cuts by hand | Woodworking | |||
| can I put 90 degree horizontal bend on drain stub out? | Home Repair | |||
Threaded Mode
