 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Furnace
Any ideas on filtering, storage, delivery, and waist disposal of used oil? Somehow, I need to keep the mess minimal. I'm thinking of making a ceramic stand for the crucible, will that work? Or making ceramic screens ? I need the pour clean or flaws will show up during machining. I built it big enough to do a large cast iron part in the future, but will stick to aluminum for the moment. SW |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Where do I get this part for an oil furnace? Has the furnace died? | Home Repair | |||
| Old Lennox Furnace - Model GH6 100T (maybe thermostat maybe furnace problem) | Home Repair | |||
| run my oil forced air furnace once a month in the summer to keep the furnace from rusting | Home Repair | |||
| Thick accordion-type furnace filters - can I retrofit furnace for standard? | Home Ownership | |||
| Replacing gas furnace (was New Gas Furnace Time) | Home Ownership | |||
![Sunworshipper[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
