Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Upside-down drill press
On Thursday, March 10, 2011 6:45:08 AM UTC-8, Gary A. Gorgen wrote:
Tom Gardner wrote: I have a project that involves drilling four 1/8" holes in a wood block. [using four drill presses] Would a die grinder, hand piece (like a foredom), air drill, work. THAT's the spirit! If your holes are 1/8" in wood, the high speed of a cheapo air grinder with 1/8" collet is perfect. And, it might be easier to slide the wood than to move multiple drills or multiple press spindles. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Upside-down drill press
"whit3rd" wrote in message ... On Thursday, March 10, 2011 6:45:08 AM UTC-8, Gary A. Gorgen wrote: Tom Gardner wrote: I have a project that involves drilling four 1/8" holes in a wood block. [using four drill presses] Would a die grinder, hand piece (like a foredom), air drill, work. THAT's the spirit! If your holes are 1/8" in wood, the high speed of a cheapo air grinder with 1/8" collet is perfect. And, it might be easier to slide the wood than to move multiple drills or multiple press spindles. Good idea but too loud. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Upside-down drill press | Metalworking | |||
Radical upside down Craftsman 10" Radial Sled Saw / Upside down tablesaw | Home Repair | |||
My radical upside down Craftsman 10" Radial Sled Saw / Upside downtable saw | Woodworking | |||
Portable drill press/guide vs. Real drill press? | Woodworking | |||
Upside down drill press story | Metalworking |