Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Sieg X3 / Grizzly G0463 coolant plug thread?
Preparing to run coolant on my X3, I pulled the coolant plug out,
expecting an NPT thread. It isn't. It's a straight thread, Major diameter is @ .620, pitch diameter is @ .577. The Grizzly manual does not even show the plug, which is at the far left rear corner. Anyone with the answer? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
H8178 Table Power Feed for G0463/G0619 (Sieg X3 / Super X3) | Metalworking | |||
Work and holder weight limits for Grizzly G0463 mill (Sieg X3 SmallMill) | Metalworking | |||
Sieg X3 impressions [Grizzlu G0463] | Metalworking | |||
Power feed for Sieg X3 {Grizzly G0463] | Metalworking | |||
Sieg X3 in USA: Grizzly now carries it. | Metalworking |