Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Unshipping 5" threaded spindle chuck on G9972Z lathe
That lathe looks similar, but bigger, to my Emco lathe. I pop the three-jaw chuck loose by opening the jaws until I can get an old axe handle crosswise between two jaws and give it a quick pop. Most of the times it comes on the first try. Have to set the gears to the lowest speed.
Paul |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Unshipping 5" threaded spindle chuck on G9972Z lathe | Metalworking | |||
Lathe chuck spindle attachment | Metalworking | |||
Strange Threaded Lathe Spindle Size? | Metalworking | |||
Lathe with threaded spindle - chuck centering repeatability | Metalworking | |||
Problem installing Tradesman drillpress - "locking" spindle arborinto the spindle | Woodworking |