Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Can one breathe industrial oxygen
Rich Grise wrote:
(...) Have you tried coughing "downhill?" Like, lie face down half on the bed, with your torso hanging over the edge, so that you're not coughing against gravity? Didn't try that. At last, a use for an 'inversion table'? Did you try some hot chicken broth or a hot toddy to loosen the gunk? Didn't. By that time, I figured I had to get some O2 or I was gonna pass out again. Luckily for me, the gear was in good shape and ready to go. --Winston |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Can one breathe industrial oxygen | Metalworking | |||
Can one breathe industrial oxygen | Metalworking | |||
Can one breathe industrial oxygen | Metalworking | |||
Can one breathe industrial oxygen | Metalworking |