Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Need oddball bolt: 1/2" x 12 TPI
Hi everyone -
I've got a repair project on an ancient (pre 1900, American-made) Chandler and Price guillotine paper cutter that I'm short a couple of odd bolts. 1/2" diameter, 12 TPI. (Yes, 12, not 13) Before I turn them out on the lathe, does anyone by any chance have anything like this (about 3/4" long, or longer and I can cut them off) they'd like to part with? I need three of them... Thanks in advance... ('reply to' is spam-trapped, use the address below) Carla carla (at) 97381 (dot) com A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Toro 22" Walk-Behind Lawnmower: Bolt Size & Type Question For Blade | Home Repair | |||
Mill homing and "drills bolt holes" | Metalworking | |||
What is the purpose of an inner "C" stop ring in a bolt action rifle? | Metalworking | |||
What's your favorite "stuck bolt" removal process? | Metalworking | |||
"slab" insulation - oddball query :-} | UK diy |