 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Got the Z axis wired too
It was kind of bad. The hex hole oin the setscrew on the encoder wheel
stripped, because the thread around it was not done all the way. I had to do some stupid stuff to get it to go. I think that I will ask US Digital for another wheel just in case. But it does seem to work. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wired Z axis servo drive | Metalworking | |||
| Added lots of safety wiring and wired the Y axis | Metalworking | |||
| Added lots of safety wiring and wired the Y axis | Metalworking | |||
| Added lots of safety wiring and wired the Y axis | Metalworking | |||
| Spindle axis vs. "Z" axis... | Metalworking | |||
Threaded Mode
