Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Attention Scroungers
If you run across one of each CHEAP, I could use a BD2 and a BD4 telephone
cable enclosure. Square rounded corner metallic preferred. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Attention Scroungers
"Bob La Londe" wrote in message ... If you run across one of each CHEAP, I could use a BD2 and a BD4 telephone cable enclosure. Square rounded corner metallic preferred. Is this something a journeyman electrician would know it is? If so, I'll put out my feeler to my main man. Steve visit my blog at http://cabgbypasssurgery.com |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Attention Scroungers
On Jul 11, 2:45*pm, "Bob La Londe" wrote:
If you run across one of each CHEAP, I could use a BD2 and a BD4 telephone cable enclosure. *Square rounded corner metallic preferred. I had to search for what you were looking for. Here is a link: http://www.charlesindustries.com/mai..._bdseries.html Paul |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Attention Scroungers
"Steve B" wrote in message
... "Bob La Londe" wrote in message ... If you run across one of each CHEAP, I could use a BD2 and a BD4 telephone cable enclosure. Square rounded corner metallic preferred. Is this something a journeyman electrician would know it is? Maybe, even most low voltage contractors would probably have to think about it unless they have a background in telephone buried plant or somebody told them. If so, I'll put out my feeler to my main man. Steve visit my blog at http://cabgbypasssurgery.com |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Attention Scroungers
" wrote in message
... On Jul 11, 2:45 pm, "Bob La Londe" wrote: If you run across one of each CHEAP, I could use a BD2 and a BD4 telephone cable enclosure. Square rounded corner metallic preferred. I had to search for what you were looking for. Here is a link: http://www.charlesindustries.com/mai..._bdseries.html Emerson also makes them. There used to be three or four others, but I can't find them anymore. |
#6
Posted to rec.crafts.metalworking
|
|||
|
|||
Attention Scroungers
" wrote in message ... On Jul 11, 2:45 pm, "Bob La Londe" wrote: If you run across one of each CHEAP, I could use a BD2 and a BD4 telephone cable enclosure. Square rounded corner metallic preferred. I had to search for what you were looking for. Here is a link: http://www.charlesindustries.com/mai..._bdseries.html Paul reply: Bob: definitely not what I had envisioned. Sorry, no can help. Steve |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
I see there are some scroungers on this board. | Metalworking | |||
Attention Mr N Cook ... | Electronics Repair | |||
Attention Tom Daniel ... | Electronics Repair | |||
Attention N.Cook ... | Electronics Repair | |||
* ATTENTION ALL BLOGGERS * | Woodworking |