 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Acme thread
I need to cut an acme thread in a steel block. Roughly 5/8" X 6. I
forget what I measured! Is that done with a tap or a boring bar? Friends have not heard of an acme tap. Thought someone might know. Thanks, Bill A |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 3 TPI Acme thread | Metalworking | |||
| Acme Juicer One of the Best Find a Sale on Acme Juicers | UK diy | |||
| Another 4-start thread question - 1/4" internal thread | Metalworking | |||
| Questions regarding thread diameter and pitch for special design case with limited thread length | Metalworking | |||
| acme thread for large wood screw | Metalworking | |||
Threaded Mode
