Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Help soldering broken bandsaw blade
"Artemus" wrote:
Obviously I'm doing something wrong here as my joints are brittle and don't hold worth squat. I ground the ends of the blade to about 45 degrees and cleaned the ends with sandpaper. I put on plenty of flux and wedged a small piece of silver solder in the scarf joint. Silver solder (low silver content) or silver braze (high silver content)? Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Soldering a Broken TV | Electronics Repair | |||
broken bandsaw blades | Metalworking | |||
bad bandsaw blade???????? | Metalworking | |||
Bandsaw blade for 6061 Al alloy? What's a good blade size to buy? | Metalworking | |||
Siver soldering bandsaw blade | Woodworking |