Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Mine is 89 inches, what about yours
Ignoramus26960 wrote: On 2010-02-25, Jim Wilkins wrote: On Feb 24, 9:04?pm, Ignoramus26960 ignoramus26...@NOSPAM. 26960.invalid wrote: ... If there is a space for a lifting bolt, I could make a super long lifting bolt so that I lift above the center of gravity. I am afraid however, that my crane will not go as high. I use an engine leveler as a spreader to lift bulky things like appliances and an Atlas lathe. http://www.supplierlist.com/photo_im...ler_500_kg.jpg It will attach right to the load to gain a lot of height clearance over diagonal sling straps. I drilled the end of the shop crane's boom for a U bolt to gain more useful headroom versus the hanging hook. BTW, mine's 65 inches. jsw I have such a spreader and I used it. However, the total height of slings/leveler/hook/chain plus the height of the Bridgep[ort will likely exceed the capability of my crane. I am pretty sure that I need to hire someone with a forklift or use some help from some friends. Series II also weight 5,500 lbs IIRC. i Fyi, I had a similar situation once that I worked around by elevating the entire engine hoist on *solid* concrete blocks which allowed me to lift the item, move the rest out from under and then lower the item down to ground level. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Mine is 89 inches, what about yours
On 2010-02-25, Pete C. wrote:
Ignoramus26960 wrote: On 2010-02-25, Jim Wilkins wrote: On Feb 24, 9:04?pm, Ignoramus26960 ignoramus26...@NOSPAM. 26960.invalid wrote: ... If there is a space for a lifting bolt, I could make a super long lifting bolt so that I lift above the center of gravity. I am afraid however, that my crane will not go as high. I use an engine leveler as a spreader to lift bulky things like appliances and an Atlas lathe. http://www.supplierlist.com/photo_im...ler_500_kg.jpg It will attach right to the load to gain a lot of height clearance over diagonal sling straps. I drilled the end of the shop crane's boom for a U bolt to gain more useful headroom versus the hanging hook. BTW, mine's 65 inches. jsw I have such a spreader and I used it. However, the total height of slings/leveler/hook/chain plus the height of the Bridgep[ort will likely exceed the capability of my crane. I am pretty sure that I need to hire someone with a forklift or use some help from some friends. Series II also weight 5,500 lbs IIRC. i Fyi, I had a similar situation once that I worked around by elevating the entire engine hoist on *solid* concrete blocks which allowed me to lift the item, move the rest out from under and then lower the item down to ground level. It is easier to pay someone $200 or some such. I have done a lot of such stuff and at this weight, it becomes a nightmare, esp. considering that I have a little slope in the concrete in front of my garage. i |
#3
Posted to rec.crafts.metalworking
|
|||
|
|||
Mine is 89 inches, what about yours
On Feb 24, 7:13*pm, Ignoramus26960 ignoramus26...@NOSPAM.
26960.invalid wrote: On 2010-02-25, Pete C. wrote: Ignoramus26960 wrote: On 2010-02-25, Jim Wilkins wrote: On Feb 24, 9:04?pm, Ignoramus26960 ignoramus26...@NOSPAM. 26960.invalid wrote: ... If there is a space for a lifting bolt, I could make a super long lifting bolt so that I lift above the center of gravity. I am afraid however, that my crane will not go as high. I use an engine leveler as a spreader to lift bulky things like appliances and an Atlas lathe. http://www.supplierlist.com/photo_im...Leveler_500_kg.... It will attach right to the load to gain a lot of height clearance over diagonal sling straps. I drilled the end of the shop crane's boom for a U bolt to gain more useful headroom versus the hanging hook. BTW, mine's 65 inches. jsw I have such a spreader and I used it. However, the total height of slings/leveler/hook/chain plus the height of the Bridgep[ort will likely exceed the capability of my crane. I am pretty sure that I need to hire someone with a forklift or use some help from some friends. Series II also weight 5,500 lbs IIRC. i Fyi, I had a similar situation once that I worked around by elevating the entire engine hoist on *solid* concrete blocks which allowed me to lift the item, move the rest out from under and then lower the item down to ground level. It is easier to pay someone $200 or some such. I have done a lot of such stuff and at this weight, it becomes a nightmare, esp. considering that I have a little slope in the concrete in front of my garage. i You really need to move to one of those nice, small, farms out West of Chicago. Maybe one with a real shop building with a concrete floor, etc. Paul |
#4
Posted to rec.crafts.metalworking
|
|||
|
|||
Mine is 89 inches, what about yours
Ignoramus26960 wrote: On 2010-02-25, Pete C. wrote: Ignoramus26960 wrote: On 2010-02-25, Jim Wilkins wrote: On Feb 24, 9:04?pm, Ignoramus26960 ignoramus26...@NOSPAM. 26960.invalid wrote: ... If there is a space for a lifting bolt, I could make a super long lifting bolt so that I lift above the center of gravity. I am afraid however, that my crane will not go as high. I use an engine leveler as a spreader to lift bulky things like appliances and an Atlas lathe. http://www.supplierlist.com/photo_im...ler_500_kg.jpg It will attach right to the load to gain a lot of height clearance over diagonal sling straps. I drilled the end of the shop crane's boom for a U bolt to gain more useful headroom versus the hanging hook. BTW, mine's 65 inches. jsw I have such a spreader and I used it. However, the total height of slings/leveler/hook/chain plus the height of the Bridgep[ort will likely exceed the capability of my crane. I am pretty sure that I need to hire someone with a forklift or use some help from some friends. Series II also weight 5,500 lbs IIRC. i Fyi, I had a similar situation once that I worked around by elevating the entire engine hoist on *solid* concrete blocks which allowed me to lift the item, move the rest out from under and then lower the item down to ground level. It is easier to pay someone $200 or some such. I have done a lot of such stuff and at this weight, it becomes a nightmare, esp. considering that I have a little slope in the concrete in front of my garage. i If you can get a forklift over for $200 that's not bad, however I got a forklift (as in bought) for $300 and it is immensely useful |
#5
Posted to rec.crafts.metalworking
|
|||
|
|||
Mine is 89 inches, what about yours
" wrote:
You really need to move to one of those nice, small, farms out West of Chicago. Maybe one with a real shop building with a concrete floor, etc. No, go east to Indiana! Wes -- "Additionally as a security officer, I carry a gun to protect government officials but my life isn't worth protecting at home in their eyes." Dick Anthony Heller |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What's just over 19 inches? | Home Repair | |||
3 inches VS. 4 inches wide Hardwood Flooring | Woodworking | |||
United inches? | Home Repair | |||
16 inches | UK diy | |||
I should have kept mine | Woodworking |