Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
Ceramic Cooktop Wiring Advice Needed!
Hello Guys!
My current cooktop has a big crack. My wife literally found a pristine ceramic cooktop on the street. I tried to install it - there were four 4-pole plugs which inserted properly into the oven part of the stove - but when I turn it on, only the outer rings fire up. Compatibility issues between stoves aside, I'm convinced I can make this work, if only I can get some info on the wiring scheme. I am in Germany. The oven/stove control is "Wamsler" The original cooktop is long gone, and the recent one had it's own "surface" controls, so I can't reverse engineer like I would like to. I simply can't find any wiring info for either the stove/oven or the cooktop online. I'm hoping someone here has expertise, and can give some helpful hints! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ceramic Cooktop | Home Repair | |||
GE ceramic cooktop | Home Repair | |||
VGA plug wiring advice needed | Electronics Repair | |||
Stains from heat ceramic cooktop | Home Ownership | |||
Basic wiring advice needed | Woodworking |