Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
WTB 2" Aluminum 6" diameter
I need two pieces of aluminum 2" thick and 6" in diameter...or a
piece(s) I can get that size out of. If you have any; price to 76044? These will be wheel spacers for a garden tractor so alloy or temper is not important. I can find lots of 1" but the smallest 2" so far is 4' x 6'. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
the "ACP production line" and "Aluminum coil coating line" equipment | Home Repair | |||
FS: 1952 Reynolds Aluminum book: "Machining Aluminum Alloys" | Metalworking | |||
need steel or AL shafts about 1" long, 1/2" diameter, with about a 3/8" hole bored in center | Metalworking |