Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 1,384
Default Need switch for 3-in-1 machine

Hello, all,

We have one of those horrible 3-in-1 machines at
work. (I know better
than letting a piece of CRAP like that in MY
shop.) Anyway, the power
switch has gone bad, it has a burned-up contact.
It is a fairly compact
rotary reversing switch with a center-off
position. It has a part #
HZ10-10P/4. I found one outfit that has the parts
manual online for what
appeas to be the identical machine, and they show
the same part # in their
book.

Does anyone know where to get such a switch? It
would be convenient to
get an identical replacement so I don't have to
drill a binch of holes, etc.

Thanks,

Jon
  #2   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 943
Default Need switch for 3-in-1 machine

try mouser or digikey - they should both have something - or alternatively
if you can fit a center off DPDT toggle switch just use that.
"Jon Elson" wrote in message
...
Hello, all,

We have one of those horrible 3-in-1 machines at work. (I know better
than letting a piece of CRAP like that in MY shop.) Anyway, the power
switch has gone bad, it has a burned-up contact. It is a fairly compact
rotary reversing switch with a center-off position. It has a part #
HZ10-10P/4. I found one outfit that has the parts manual online for what
appeas to be the identical machine, and they show the same part # in their
book.

Does anyone know where to get such a switch? It would be convenient to
get an identical replacement so I don't have to drill a binch of holes,
etc.

Thanks,

Jon


  #3   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 3,444
Default Need switch for 3-in-1 machine

Jon Elson wrote:

(...)


It has a part #
HZ10-10P/4. I found one outfit that has the parts manual online for what
appeas to be the identical machine, and they show the same part # in their
book.

Does anyone know where to get such a switch? It would be convenient to
get an identical replacement so I don't have to drill a binch of holes,
etc.


Like item 220 in:
http://www.harborfreight.com/cpi/cta...rm&ItemID=5980

Harbor Freight will sell you the part.
It takes a while though (like 6 weeks).

http://www.harborfreight.com/cpi/cta...borfreight.com
http://www.harborfreight.com/cpi/ctaf/cs.taf


--Winston


--

In the middle of some desert, is a gigantic pile consisting
of nothing but your ballpoint pens and spray bottles of
glass cleaner.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Washing machine problem: timing switch or motor? BE Electronics Repair 22 July 2nd 07 09:31 PM
How test washing machine fill level switch?? Echols Home Repair 6 November 16th 05 04:38 PM
Indesit 1300 Washing Machine - Dial clicks round until I switch it off Graham Brooker UK diy 2 August 31st 05 07:29 PM
Dodgy on/off switch on Whirlpool Washing Machine Charlie UK diy 2 July 9th 03 11:23 PM


All times are GMT +1. The time now is 05:19 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"