DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Metalworking (https://www.diybanter.com/metalworking/)
-   -   Need switch for 3-in-1 machine (https://www.diybanter.com/metalworking/289649-need-switch-3-1-machine.html)

Jon Elson October 18th 09 03:03 AM

Need switch for 3-in-1 machine
 
Hello, all,

We have one of those horrible 3-in-1 machines at
work. (I know better
than letting a piece of CRAP like that in MY
shop.) Anyway, the power
switch has gone bad, it has a burned-up contact.
It is a fairly compact
rotary reversing switch with a center-off
position. It has a part #
HZ10-10P/4. I found one outfit that has the parts
manual online for what
appeas to be the identical machine, and they show
the same part # in their
book.

Does anyone know where to get such a switch? It
would be convenient to
get an identical replacement so I don't have to
drill a binch of holes, etc.

Thanks,

Jon

Bill Noble[_2_] October 18th 09 03:12 AM

Need switch for 3-in-1 machine
 
try mouser or digikey - they should both have something - or alternatively
if you can fit a center off DPDT toggle switch just use that.
"Jon Elson" wrote in message
...
Hello, all,

We have one of those horrible 3-in-1 machines at work. (I know better
than letting a piece of CRAP like that in MY shop.) Anyway, the power
switch has gone bad, it has a burned-up contact. It is a fairly compact
rotary reversing switch with a center-off position. It has a part #
HZ10-10P/4. I found one outfit that has the parts manual online for what
appeas to be the identical machine, and they show the same part # in their
book.

Does anyone know where to get such a switch? It would be convenient to
get an identical replacement so I don't have to drill a binch of holes,
etc.

Thanks,

Jon



Winston October 19th 09 04:08 AM

Need switch for 3-in-1 machine
 
Jon Elson wrote:

(...)


It has a part #
HZ10-10P/4. I found one outfit that has the parts manual online for what
appeas to be the identical machine, and they show the same part # in their
book.

Does anyone know where to get such a switch? It would be convenient to
get an identical replacement so I don't have to drill a binch of holes,
etc.


Like item 220 in:
http://www.harborfreight.com/cpi/cta...rm&ItemID=5980

Harbor Freight will sell you the part.
It takes a while though (like 6 weeks).

http://www.harborfreight.com/cpi/cta...borfreight.com
http://www.harborfreight.com/cpi/ctaf/cs.taf


--Winston


--

In the middle of some desert, is a gigantic pile consisting
of nothing but your ballpoint pens and spray bottles of
glass cleaner.


All times are GMT +1. The time now is 06:31 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter