Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
pressure transducers needed
Anyone got a quick on-line source for some pressure transducers? I need
a ballpark number for a grant proposal ASAP. These would go on the high and low sides of a standard R134 refrigeration setup. low side would be soft vac to perhaps 25 or 50 psi, high side would be 0 to 250 psi. These are lab demos, would not need to be super accurate but would need to clearly distinguish 1/4 to 1/2 psi. Output would be something analog, open to suggestions. It would be used in conjunction with a thermocouple input box so I would need to do some signal translation somewhere. And no, I did not google, the stupid tractor is sick, trying to do two things at once. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Pressure washer recommendation needed | Home Repair | |||
Water pressure advice needed | Home Repair | |||
Gas Pressure Washer -- suggestions needed | Home Repair | |||
20-25 kHz transducers | Electronics | |||
Water pressure issue? Advice needed | Home Ownership |