 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#8
Posted to rec.crafts.metalworking
|
|||
|
|||
RPM of small gas engine
On Fri, 3 Apr 2009 19:42:00 -0600, "SteveB"
wrote: "RoyJ" wrote in message om... Standard small engine (single cylinder, 4 cycle, 3 to 14 hp) rpm is 3600, some later engines run a few hundred RPM faster. The 4 cyl. Continental on my SA 200 welder runs at 1450 rpm. Steve But that is not a "small engine" |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| small engine interchangeability? | Home Repair | |||
| Small Engine Troubleshooting | Home Repair | |||
| small engine: wouldn't run, now won't start. | Home Repair | |||
| Small Engine Repair | Home Repair | |||
| Small engine help | Home Repair | |||
Threaded Mode
