Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default Bob Swinney -- Phase converters

"DoN. Nichols" fired this volley in
:

What ever happened to them over the years?



Transitron eventually consolidated its manufacturing in New Mexico,
and sold all of its plant facilities east of the Mississippi to
Sparton Electronics.

The Florida engineers spun off their own transformer companies, most
of which are still doing well.

LLoyd
  #42   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 2,600
Default Bob Swinney -- Phase converters

On 2009-01-22, Lloyd E. Sponenburgh lloydspinsidemindspring.com wrote:
"DoN. Nichols" fired this volley in
:

What ever happened to them over the years?



Transitron eventually consolidated its manufacturing in New Mexico,
and sold all of its plant facilities east of the Mississippi to
Sparton Electronics.


O.K. I see that they are still around -- but have no "history"
link on their website.

The Florida engineers spun off their own transformer companies, most
of which are still doing well.


Is any branch still doing semiconductor development? That is
what they were doing when I was there.

Thanks,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
  #43   Report Post  
Posted to rec.crafts.metalworking
external usenet poster
 
Posts: 4,632
Default Bob Swinney -- Phase converters

"DoN. Nichols" fired this volley in
:

Is any branch still doing semiconductor development? That is
what they were doing when I was there.



Dunno, Don. The only two guys I know who are still around here are 1)
Running his own transformer plant, and 2) a county councilman.

LLoyd
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
rotary phase converters spamkill at charter dot net Metalworking 7 July 28th 07 05:56 AM
Phase Converters JB Metalworking 58 July 28th 05 03:44 PM
OT (slightly) : Used 3 phase converters Kalico UK diy 7 December 17th 04 11:10 AM
Rotary phase converters Weyland Metalworking 0 March 14th 04 09:35 PM
Phase Converters vs. VFDs JMartin957 Metalworking 7 October 30th 03 02:13 PM


All times are GMT +1. The time now is 03:31 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"