 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
16 inch gun details
Some additional details of the 16 inch guns previously discussed, including both a breakdown of the gun and ballistic charts. http://www.eugeneleeslover.com/AMMUN...D-FORWARD.html http://www.eugeneleeslover.com/USN-G...NGE-TABLE.html Cheers, Bruce (bruceinbangkokatgmaildotcom) |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| table saw with 2.5 inch or 4 inch dust port? | Woodworking | |||
| bending 1/2 inch wide stock to a 3/8 inch radius | Home Repair | |||
| 48 Inch Vanity between 2 walls...But 49 inch top wont fit | Home Repair | |||
| joining 1 1/2 inch pvc and 1 1/2 inch copper | Home Repair | |||
| atlas 6 inch compound rest same as 10 inch? | Metalworking | |||
![Bruce in Bangkok[_7_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
